You use upgrade codeunits when you make changes to a table definition, either from the Microsoft Dynamics NAV Development Environment or during an upgrade. Upgrade codeunits migrate existing business data from the old table structure into the new table structure. An upgrade codeunit serves the following purposes:
Provides instructions for how to handle data changes to a table during schema synchronization. For more information, see Synchronizing Table Schemas.
Provides the logic for migrating existing data in the business data table from the old format to the new format after schema synchronization.
A typical example of when to use an upgrade codeunit is when you remove a field from a table definition and you do not want to lose the existing data in the business data table. Instead, you want to use it somewhere else in the new application.
You implement upgrade codeunits when you make destructive changes to tables in Microsoft Dynamics NAV Development Environment. For more information about destructive changes, see Handling Destructive Changes With Table Schema Synchronization. After you have created an upgrade codeunit to handle table changes, you can use it when you upgrade data from an earlier version of Microsoft Dynamics NAV to the current version. A single upgrade codeunit will typically contain table schema synchronization instructions and data migration logic for multiple tables that have changed from one version of Microsoft Dynamics NAV to another.
|For an example that explains how to create and implement upgrade codeunits, see the Microsoft Dynamics NAV Upgrade Demo Script document at http://go.microsoft.com/fwlink/?LinkID=509977. This document provides step-by-step instructions that support the concepts discussed in this topic.|
Upgrade Codeunits Overview
An upgrade codeunit consists of three sections that are defined by specific function types:
Instructions for synchronizing schema changes for tables. These instructions are included in a TableSyncSetup function.
Logic for checking conditions that must be met in order for the data upgrade process is started. This logic is included in a CheckPrecondition function.
Logic for migrating the data from the old table structure into the new table structure and any additional data upgrade logic as required. This logic is included in an Upgrade function.
To create an upgrade codeunit, you set the SubType Property (Codeunit) of a codeunit to Upgrade. You can create multiple upgrade codeunits.
Upgrade Codeunit Design and Flow
Upgrade codeunits are run by Microsoft Dynamics NAV Server when you synchronize table schemas and when you start the data upgrade process. The following describes the upgrade codeunit process for these operations.
Table Schema Synchronization
When Microsoft Dynamics NAV Server detects an update to a table definition (metadata) that changes the table schema in the database in SQL Server, it will search the TableSyncSetup functions in the upgrade codeunits to collect the schema synchronization instructions for changed tables.
If there are instructions for the table, then Microsoft Dynamics NAV Server handles the data according to the instructions. Depending on the synchronization mode, Microsoft Dynamics NAV Server can:
Move or copy the data from the old tables into upgrade tables.
Delete data in the table fields that are affected by the changes and apply schema changes forcefully.
Check whether there is data in the affected fields and then apply schema changes only if they do not contain data.
- Move or copy the data from the old tables into upgrade tables.
If there are no instructions for the table in the TableSyncSetup functions, then Microsoft Dynamics NAV Server checks whether the changes are destructive.
If the changes are destructive, the schema synchronization is cancelled.
If the changes are not destructive, they will be applied to the table.
- If the changes are destructive, the schema synchronization is cancelled.
After schema synchronization is completed, you must run the data upgrade process to remap any data that was saved in upgrade tables to the new application. If no data was saved during table schema synchronization, then running the data upgrade is not required.
You can start the data upgrade from the development environment or by using the data upgrade cmdlets from the Microsoft Dynamics NAV 2015 Administration Shell. Data upgrade process consists of two phases: running the upgrade precondition checks and running the upgrade functions that migrate data from the upgrade tables into the new locations in the application and perform other data upgrade manipulations that are required by the new version of the application.
When you start the data upgrade, Microsoft Dynamics NAV Server runs the CheckPrecondition functions in upgrade codeunits for all companies in the database. By default, the functions are run in parallel mode, which means that they are run at the same time. If none of the CheckPrecondition functions return errors, then Microsoft Dynamics NAV Server proceeds to run the Upgrade functions in the upgrade codeunit.
After the CheckPrecondition functions are run, the Upgrade functions are run for all companies in the database. By default, these functions are also run in parallel mode. Each function is executed within its own system session. Because these functions run in parallel, you should design them so that they are independent of each other and do not write to the same table. Running data upgrade functions in parallel can significantly improve the upgrade performance, especially when you have multiple companies in your database. If the Upgrade functions must be run in a specific order or they write to the same tables, you can change the functions to Normal function types within the upgrade codeunit. Then, create a single Upgrade function that calls the Normal functions in the desired order. With this implementation, you can achieve the same performance level as running multiple Upgrade functions in parallel.
You can choose to run the data upgrade in serial mode, where all functions will be executed one after another. This can be useful, for example, when you are debugging the data upgrade code.
|You cannot run upgrade codeunits directly. Upgrade codeunits can only be invoked by Microsoft Dynamics NAV Server during a data upgrade. You can only run the data upgrade process on a database that is in operational state.|
For more information about how to run the data upgrade process, see Upgrading Data.
The TableSyncSetup function type provides instructions to Microsoft Dynamics NAV Server about how to process a table for which schema changes have been detected. Microsoft Dynamics NAV Server uses virtual table 2000000135 Table Synch. Setup to collect the instructions for each table it detects as being changed. Whenever Microsoft Dynamics NAV Server detects an update in the table definition (metadata), it will populate that virtual table with the IDs of the changed tables.
To set up a TableSyncSetup function type, you add a C/AL function and set the FunctionType property of a function to TableSyncSetup. A TableSyncSetup function must have the following signature:
<function name>(VAR <record name> : Record "Table Sync. Setup")
For each table that has been changed, you provide synchronization instructions as C/AL code in the TableSyncSetup function. The instructions specify a mode for handling the data in the changed table. For more information about the modes, see TableSyncSetup Modes. The CRONUS International Ltd. demonstration database (Demo Database NAV (8-0) demonstration database) includes codeunit 9900 Data Upgrade Mgt. that you can use to populate table 2000000135 Table Synch. Setup with the modes for each changed table. In this codeunit, you can add instructions in SetTableSyncSetup function as shown in the following example:
DataUpgradeMgt.SetTableSyncSetup(DATABASE::"Change Log Entry",50000,TableSynchSetup.Mode::Copy);
If fields are removed from the table definition, the data is copied to the specified upgrade table, and then the changes are applied to the table in SQL Server.
|Do not add any code to this function other than table synchronization instructions. The TableSyncSetup type function is called automatically by Microsoft Dynamics NAV Server during the schema synchronization process and it is only meant for populating the Table Synch. Setup table with the synchronization instructions.|
The TableSyncSetup function is called under the following circumstances:
From the development environment, when you save, compile, or delete a table and set the Synchronize Schema option to Now - with validation.
From the development environment, when you synchronize schemas for all tables and choose the Check Only or With Validation options.
When you run the Sync-NAVTenant cmdlet and set to Mode parameter to CheckOnly or Sync.
There are four modes that specify how to synchronize the changes and handle existing data in the SQL table.
Before applying the schema changes to the business data table, the Microsoft Dynamics NAV Server checks whether there is data in the field of the business data table that is affected by the change. If there is data in the field, then an error occurs, and the schema changes are not applied to the business data table. If there no data in the field, then the changes are applied to the business data table.
This is the default mode.
This mode uses an upgrade table to store existing data from the business data table. You must create the upgrade table manually in advance before introducing the change. To create the upgrade table, you save the table you are about to change as another table with an ID in the upgrade toolkit range. Then, you remove the C/AL code from the triggers, and clean up the properties referencing other tables without the field specification, because all the data will be moved.
When the schema is synchronized, if there is data in the field of business data table that is affected by the table definition change, then the data is deleted from the business data table and moved to the upgrade table. Then, the schema changes are applied to the business data table. When the synchronization is completed, the business data table will be empty but its schema will match the table definition. If there is no data in the field that is affected by the table definition change, then the changes are simply applied to the business data table.
If required, you can then write code to copy necessary data from the upgrade table into the new table.
This mode also uses an upgrade table to store existing data from the business data table. You must create the upgrade table manually in advance before introducing the change.
When the schema is synchronized, if there is data in field of business data table that is affected by the table definition change, then data in the business data table is replicated in the upgrade table. Then, the schema changes are applied to the business data table. If no error occurs, then the changes are applied to the SQL table.
The Microsoft Dynamics NAV Server will force the changes on the table and delete any data in fields that are affected by the change. This option is intended to be used for the tables and fields that you want to discontinue. If you want to save the data from this table, you should use the Copy or Move mode.
CheckPreconditions Function Type
CheckPreconditions functions resemble upgrade functions that were used in earlier versions of Microsoft Dynamics NAV. In CheckPreconditions functions, you write C/AL code to verify whether certain upgrade conditions have been fulfilled before the Upgrade type functions are run.
Before Microsoft Dynamics NAV Server calls the Upgrade functions, it executes the CheckPrecondition functions for all companies in the database.
To set up a CheckPrecondition function in the upgrade codeunit, you add a C/AL function and set the FunctionType property of the function to CheckPrecondition.
Upgrade Function Types
Upgrade functions are also similar to upgrade functions that were used in earlier versions of Microsoft Dynamics NAV. In Upgrade type functions, you can write C/AL code to migrate data from the upgrade tables into new tables. Additionally, you can add code to perform other operations that are required to align the existing data in tables to the requirements of the new application.
Upgrade functions are executed by Microsoft Dynamics NAV Server for all companies in the database after it has completed executing the CheckPrecondition functions.
To set up an Upgrade function in the upgrade codeunit, you add a C/AL function and set the FunctionType property of the function to Upgrade.
|You can call Normal type functions from the Upgrade functions. However, do not call Upgrade functions from other Upgrade functions. This is because Microsoft Dynamics NAV Server will execute all the Upgrade functions in the upgrade codeunit, which can result in some functions being called more than one time.|